Long-feed tracking
Film runs over long distances without drifting off the rollers, so a full-vehicle job stays aligned from the first panel to the last.
A quiet stepper-driven vertical roll cutter with 1540 mm cutting width, vacuum hold-down and layered blade pressure for PPF, window film and colour-change film.
Vertical Roll Cutter
Everyday roll cutting for a working wrap shop
The Z008 is the entry machine in ZhiTu's vertical roll line. An imported ultra-quiet stepper drive moves the head at up to 1200 mm/s across a 1540 mm cutting width, and seven pinch rollers plus a negative-pressure hold-down keep film flat and tracking straight over long…
Vacuum hold-down
A negative-pressure system holds film flat against the platen, which stops thin PPF and colour-change film lifting mid-cut.
Layered blade pressure
Blade force is set in stages, so liner-only half cuts and full cuts can share a single job without changing the setup.
Spécifications du produit
| Max feed width | 1660 mm |
|---|---|
| Largeur de coupe maximale | 1540 mm |
| Cutting speed | 1200 mm/s |
| Cutting accuracy | ±0.02 mm |
| Blade pressure | 800 g |
| Système d'entraînement | Imported ultra-quiet stepper motor |
| Pinch rollers | 7 |
| Mainboard | Steel-shielded mainboard |
| Interface de données | USB / USB drive / TCP |
| Supported software | AIDCUT (CDR, AI), Jinkacut (SignMaster), Sign Cut |
| Command language | HPGL |
| Input voltage | 100–200 V / 200–240 V |
| Cable run | 7 m |
| Machine size / net weight | 190 × 66 × 110 cm / 35.7 kg |
| Packing size / gross weight | 195 × 35 × 42.5 cm / 42 kg |
Produits connexes
